Von dem Buch Minimum Reinforcement in Concrete Members haben wir 2 gleiche oder sehr ähnliche Ausgaben identifiziert!
Falls Sie nur an einem bestimmten Exempar interessiert sind, können Sie aus der folgenden Liste jenes wählen, an dem Sie interessiert sind:
100%: A. Carpinteri, A Carpinteri: Minimum Reinforcement in Concrete Members (ISBN: 9780080536569) 1999, in Englisch, auch als eBook.
Nur diese Ausgabe anzeigen…
Nur diese Ausgabe anzeigen…
77%: A. Carpinteri, A Carpinteri: Minimum Reinforcement in Concrete Members, Volume 24 (European Structural Integrity Society) (ISBN: 9780080430225) 1999, Elsevier Science, Amsterdam, Netherlands, Erstausgabe, in Englisch, Band: 24, Broschiert.
Nur diese Ausgabe anzeigen…
Nur diese Ausgabe anzeigen…
Minimum Reinforcement in Concrete Members - 7 Angebote vergleichen
Bester Preis: € 102,84 (vom 09.06.2016)1
Minimum Reinforcement in Concrete Members (1999)
EN HC NW
ISBN: 9780080430225 bzw. 0080430228, in Englisch, Elsevier Science &Amp; Technology, gebundenes Buch, neu.
Lieferung aus: Niederlande, 12 werkdagen.
bol.com.
The ESIS-Technical Committee 9 on Concrete was established in 1990 and has met seven times. A proposal was put to European and extra-European laboratories entitled "Scale effects and transitional failure phenomena of reinforced concrete beams in flexure" which lead to several positive responses. The central topic discussed by the committee was that of the minimum reinforcement in concrete members. The minimum amount of reinforcement is defined as that for which "peak load at first concrete crack..., The ESIS-Technical Committee 9 on Concrete was established in 1990 and has met seven times. A proposal was put to European and extra-European laboratories entitled "Scale effects and transitional failure phenomena of reinforced concrete beams in flexure" which lead to several positive responses. The central topic discussed by the committee was that of the minimum reinforcement in concrete members. The minimum amount of reinforcement is defined as that for which "peak load at first concrete cracking" and "ultimate load after steel yielding" are equal. In this way, any brittle behaviour is avoided as well as any localized failure, if the member is not over-reinforced. In other words, there is a reinforcement percentage range, depending on the size-scale, within which the plastic limit analysis may be applied with its static and kinematic theorems. Carpinteri, Ferro, Bosco and El-Katieb propose a LEFM model, according to which reinforcement reactions are applied directly on the crack surfaces and a compatibility condition is locally imposed on the crack opening displacement in correspondence with the reinforcement. The theoretical model is found to provide a satisfactory estimate of the minimum percentage of reinforcement that depends on the scale and enables the element in flexure to prevent brittle failure. Taal: Engels;Afmetingen: 13x230 mm;Gewicht: 635,00 gram;Verschijningsdatum: april 1999;ISBN10: 0080430228;ISBN13: 9780080430225; Engelstalig | Hardcover | 1999.
bol.com.
The ESIS-Technical Committee 9 on Concrete was established in 1990 and has met seven times. A proposal was put to European and extra-European laboratories entitled "Scale effects and transitional failure phenomena of reinforced concrete beams in flexure" which lead to several positive responses. The central topic discussed by the committee was that of the minimum reinforcement in concrete members. The minimum amount of reinforcement is defined as that for which "peak load at first concrete crack..., The ESIS-Technical Committee 9 on Concrete was established in 1990 and has met seven times. A proposal was put to European and extra-European laboratories entitled "Scale effects and transitional failure phenomena of reinforced concrete beams in flexure" which lead to several positive responses. The central topic discussed by the committee was that of the minimum reinforcement in concrete members. The minimum amount of reinforcement is defined as that for which "peak load at first concrete cracking" and "ultimate load after steel yielding" are equal. In this way, any brittle behaviour is avoided as well as any localized failure, if the member is not over-reinforced. In other words, there is a reinforcement percentage range, depending on the size-scale, within which the plastic limit analysis may be applied with its static and kinematic theorems. Carpinteri, Ferro, Bosco and El-Katieb propose a LEFM model, according to which reinforcement reactions are applied directly on the crack surfaces and a compatibility condition is locally imposed on the crack opening displacement in correspondence with the reinforcement. The theoretical model is found to provide a satisfactory estimate of the minimum percentage of reinforcement that depends on the scale and enables the element in flexure to prevent brittle failure. Taal: Engels;Afmetingen: 13x230 mm;Gewicht: 635,00 gram;Verschijningsdatum: april 1999;ISBN10: 0080430228;ISBN13: 9780080430225; Engelstalig | Hardcover | 1999.
2
Minimum Reinforcement in Concrete Members (1999)
EN NW EB
ISBN: 9780080536569 bzw. 0080536565, in Englisch, Elsevier Science, neu, E-Book.
Lieferung aus: Niederlande, Direct beschikbaar.
bol.com.
The ESIS-Technical Committee 9 on Concrete was established in 1990 and has met seven times. A proposal was put to European and extra-European laboratories entitled 'Scale effects and transitional failure phenomena of reinforced concrete beams in flexure' which lead to several positive responses. The central topic discussed by the committee was that of the minimum reinforcement in concrete members. The minimum amount of reinforcement is defined as that for which 'peak load at first concrete crack... The ESIS-Technical Committee 9 on Concrete was established in 1990 and has met seven times. A proposal was put to European and extra-European laboratories entitled 'Scale effects and transitional failure phenomena of reinforced concrete beams in flexure' which lead to several positive responses. The central topic discussed by the committee was that of the minimum reinforcement in concrete members. The minimum amount of reinforcement is defined as that for which 'peak load at first concrete cracking' and 'ultimate load after steel yielding' are equal. In this way, any brittle behaviour is avoided as well as any localized failure, if the member is not over-reinforced. In other words, there is a reinforcement percentage range, depending on the size-scale, within which the plastic limit analysis may be applied with its static and kinematic theorems. Carpinteri, Ferro, Bosco and El-Katieb propose a LEFM model, according to which reinforcement reactions are applied directly on the crack surfaces and a compatibility condition is locally imposed on the crack opening displacement in correspondence with the reinforcement. The theoretical model is found to provide a satisfactory estimate of the minimum percentage of reinforcement that depends on the scale and enables the element in flexure to prevent brittle failure. Productinformatie:Taal: Engels;Formaat: ePub met kopieerbeveiliging (DRM) van Adobe;Bestandsgrootte: 9.48 MB;Kopieerrechten: Het kopiëren van (delen van) de pagina's is niet toegestaan ;Printrechten: Het printen van de pagina's is niet toegestaan;Voorleesfunctie: De voorleesfunctie is uitgeschakeld;Geschikt voor: Alle e-readers te koop bij bol.com (of compatible met Adobe DRM). Telefoons/tablets met Google Android (1.6 of hoger) voorzien van bol.com boekenbol app. PC en Mac met Adobe reader software;ISBN10: 0080536565;ISBN13: 9780080536569; Engels | Ebook | 1999.
bol.com.
The ESIS-Technical Committee 9 on Concrete was established in 1990 and has met seven times. A proposal was put to European and extra-European laboratories entitled 'Scale effects and transitional failure phenomena of reinforced concrete beams in flexure' which lead to several positive responses. The central topic discussed by the committee was that of the minimum reinforcement in concrete members. The minimum amount of reinforcement is defined as that for which 'peak load at first concrete crack... The ESIS-Technical Committee 9 on Concrete was established in 1990 and has met seven times. A proposal was put to European and extra-European laboratories entitled 'Scale effects and transitional failure phenomena of reinforced concrete beams in flexure' which lead to several positive responses. The central topic discussed by the committee was that of the minimum reinforcement in concrete members. The minimum amount of reinforcement is defined as that for which 'peak load at first concrete cracking' and 'ultimate load after steel yielding' are equal. In this way, any brittle behaviour is avoided as well as any localized failure, if the member is not over-reinforced. In other words, there is a reinforcement percentage range, depending on the size-scale, within which the plastic limit analysis may be applied with its static and kinematic theorems. Carpinteri, Ferro, Bosco and El-Katieb propose a LEFM model, according to which reinforcement reactions are applied directly on the crack surfaces and a compatibility condition is locally imposed on the crack opening displacement in correspondence with the reinforcement. The theoretical model is found to provide a satisfactory estimate of the minimum percentage of reinforcement that depends on the scale and enables the element in flexure to prevent brittle failure. Productinformatie:Taal: Engels;Formaat: ePub met kopieerbeveiliging (DRM) van Adobe;Bestandsgrootte: 9.48 MB;Kopieerrechten: Het kopiëren van (delen van) de pagina's is niet toegestaan ;Printrechten: Het printen van de pagina's is niet toegestaan;Voorleesfunctie: De voorleesfunctie is uitgeschakeld;Geschikt voor: Alle e-readers te koop bij bol.com (of compatible met Adobe DRM). Telefoons/tablets met Google Android (1.6 of hoger) voorzien van bol.com boekenbol app. PC en Mac met Adobe reader software;ISBN10: 0080536565;ISBN13: 9780080536569; Engels | Ebook | 1999.
3
Minimum Reinforcement in Concrete Members, Volume 24 (European Structural Integrity Society) (1999)
EN HC
ISBN: 9780080430225 bzw. 0080430228, Band: 24, in Englisch, Elsevier Science, gebundenes Buch.
Lieferung aus: Vereinigte Staaten von Amerika, Versandkosten nach: USA.
Von Händler/Antiquariat, Ergodebooks.
Elsevier Science, 1999-05-06. 1. Hardcover. Used:Good. Buy with confidence. Excellent Customer Service & Return policy. Ships Fast. Expedite Shipping Available.
Von Händler/Antiquariat, Ergodebooks.
Elsevier Science, 1999-05-06. 1. Hardcover. Used:Good. Buy with confidence. Excellent Customer Service & Return policy. Ships Fast. Expedite Shipping Available.
4
Minimum Reinforcement in Concrete Members (1999)
EN HC US
ISBN: 9780080430225 bzw. 0080430228, in Englisch, Elsevier Science, Amsterdam, Netherlands, gebundenes Buch, gebraucht.
Lieferung aus: Vereinigte Staaten von Amerika, zzgl. Versandkosten, Verandgebiet: DOM.
Von Händler/Antiquariat, Marvel Books, CT, Ridgefield, [RE:3].
Hard cover.
Von Händler/Antiquariat, Marvel Books, CT, Ridgefield, [RE:3].
Hard cover.
5
Minimum Reinforcement in Concrete Members (1999)
EN HC NW
ISBN: 9780080430225 bzw. 0080430228, in Englisch, Elsevier Science, gebundenes Buch, neu.
Lieferung aus: Vereinigtes Königreich Großbritannien und Nordirland, zzgl. Versandkosten, Verandgebiet: EUR.
Von Händler/Antiquariat, Herb Tandree Philosophy Books, Stroud, Glos, [RE:4].
Hardback.
Von Händler/Antiquariat, Herb Tandree Philosophy Books, Stroud, Glos, [RE:4].
Hardback.
6
Minimum Reinforcement in Concrete Members, Volume 24 (European Structural Integrity Society) (1999)
EN HC NW FE
ISBN: 9780080430225 bzw. 0080430228, Band: 24, in Englisch, Elsevier Science, gebundenes Buch, neu, Erstausgabe.
Lieferung aus: Vereinigte Staaten von Amerika, zzgl. Versandkosten, Verandgebiet: DOM.
Von Händler/Antiquariat, ExtremelyReliable, TX, Richmond, [RE:4].
Hardcover, 1.
Von Händler/Antiquariat, ExtremelyReliable, TX, Richmond, [RE:4].
Hardcover, 1.
Lade…