Von dem Buch Ceramics and Ceramic Composites: Materialographic Preparation haben wir 2 gleiche oder sehr ähnliche Ausgaben identifiziert!
Falls Sie nur an einem bestimmten Exempar interessiert sind, können Sie aus der folgenden Liste jenes wählen, an dem Sie interessiert sind:
100%: Elssner, G.; Hoven, H.; Kiessler, G.; Wellner, P.: Ceramics and Ceramic Composites: Materialographic Preparation (ISBN: 9780444100306) in Englisch, Broschiert.Nur diese Ausgabe anzeigen…
100%: H. Hoven;G. Kiessler;G. Elssner;P. Wellner: Ceramics and Ceramic Composites: Materialographic Preparation (ISBN: 9780080528816) in Englisch, auch als eBook.Nur diese Ausgabe anzeigen…
Ceramics and Ceramic Composites: Materialographic Preparation
8 Angebote vergleichen
Bester Preis: € 105,25 (vom 22.03.2021)1
Ceramics and Ceramic Composites
EN NW EBISBN: 9780444100306 bzw. 044410030X, in Englisch, Elsevier Science, neu, E-Book.
Lieferung aus: Vereinigte Staaten von Amerika, Ebook for download.
Business, Ceramics and ceramic composites are now used in almost all areas of technology and have potential for even greater and more widespread applications. To make this a reality, it is increasingly necessary to understand the microstructure of the material and its relationship with properties and performance. Central to this is the characterization of the material, in particular using optical and scanning electron microscopy techniques. This book acts as an expert guide to the various steps necessary for successful and accurate characterization of these materials including the crucially important preparation stage, the techniques used to reveal the microstructure and the analysis of the results. In particular, the book presents fundamental information on preparing polished sections of ceramics and ceramic composites including the main steps of sampling, sectioning, mounting and impregnation, and mechanical grinding, lapping and polishing. It discusses microstructural imaging in the optical microscope (OM) and the use of the scanning electron microscope (SEM). Etching or contrast enhancement following final polishing in order to reveal the material's microstructure is also covered. An entire chapter is devoted to material-specific preparation procedures for polished sections. These procedures take into account the properties of the ceramic or composite being examined and the purpose of the examination. They have proven to be very suitable for the respective materials and are effective for revealing the pores. The examples presented here for ceramics and ceramic composites provide polished sections of good to excellent quality for routine examination under the optical microscope. They include tips for etching and contrast enhancement, as well as microstructural images. Chapter 5 discusses the preparation of polished sections for purposes of examination and contains information on producing oblique sections and controlled removal of material. It also addresses the production of thin sections. As a complement to the examination of the microstructure, chapter 6 provides insight into the evaluation of hardness testing indentations. Chapter 7 concludes this work with an overview of the technical literature. eBook.
Business, Ceramics and ceramic composites are now used in almost all areas of technology and have potential for even greater and more widespread applications. To make this a reality, it is increasingly necessary to understand the microstructure of the material and its relationship with properties and performance. Central to this is the characterization of the material, in particular using optical and scanning electron microscopy techniques. This book acts as an expert guide to the various steps necessary for successful and accurate characterization of these materials including the crucially important preparation stage, the techniques used to reveal the microstructure and the analysis of the results. In particular, the book presents fundamental information on preparing polished sections of ceramics and ceramic composites including the main steps of sampling, sectioning, mounting and impregnation, and mechanical grinding, lapping and polishing. It discusses microstructural imaging in the optical microscope (OM) and the use of the scanning electron microscope (SEM). Etching or contrast enhancement following final polishing in order to reveal the material's microstructure is also covered. An entire chapter is devoted to material-specific preparation procedures for polished sections. These procedures take into account the properties of the ceramic or composite being examined and the purpose of the examination. They have proven to be very suitable for the respective materials and are effective for revealing the pores. The examples presented here for ceramics and ceramic composites provide polished sections of good to excellent quality for routine examination under the optical microscope. They include tips for etching and contrast enhancement, as well as microstructural images. Chapter 5 discusses the preparation of polished sections for purposes of examination and contains information on producing oblique sections and controlled removal of material. It also addresses the production of thin sections. As a complement to the examination of the microstructure, chapter 6 provides insight into the evaluation of hardness testing indentations. Chapter 7 concludes this work with an overview of the technical literature. eBook.
2
Ceramics and Ceramic Composites: Materialographic Preparation
EN NWISBN: 9780444100306 bzw. 044410030X, in Englisch, Elsevier Science, neu.
Lieferung aus: Niederlande, In Stock.
Engineering, Ceramics and ceramic composites are now used in almost all areas of technology and have potential for even greater and more widespread applications. To make this a reality, it is increasingly necessary to understand the microstructure of the material and its relationship with properties and performance. Central to this is the characterization of the material, in particular using optical and scanning electron microscopy techniques.This book acts as an expert guide to the various steps necessary for successful and accurate characterization of these materials including the crucially important preparation stage, the techniques used to reveal the microstructure and the analysis of the results.In particular, the book presents fundamental information on preparing polished sections of ceramics and ceramic composites including the main steps of sampling, sectioning, mounting and impregnation, and mechanical grinding, lapping and polishing. It discusses microstructural imaging in the optical microscope (OM) and the use of the scanning electron microscope (SEM). Etching or contrast enhancement following final polishing in order to reveal the material's microstructure is also covered.An entire chapter is devoted to material-specific preparation procedures for polished sections. These procedures take into account the properties of the ceramic or composite being examined and the purpose of the examination. They have proven to be very suitable for the respective materials and are effective for revealing the pores. The examples presented here for ceramics and ceramic composites provide polished sections of good to excellent quality for routine examination under the optical microscope. They include tips for etching and contrast enhancement, as well as microstructural images. Chapter 5 discusses the preparation of polished sections for purposes of examination and contains information on producing oblique sections and controlled removal of material. It also addresses the production of thin sections. As a complement to the examination of the microstructure, chapter 6 provides insight into the evaluation of hardness testing indentations. Chapter 7 concludes this work with an overview of the technical literature. Printbook.
Engineering, Ceramics and ceramic composites are now used in almost all areas of technology and have potential for even greater and more widespread applications. To make this a reality, it is increasingly necessary to understand the microstructure of the material and its relationship with properties and performance. Central to this is the characterization of the material, in particular using optical and scanning electron microscopy techniques.This book acts as an expert guide to the various steps necessary for successful and accurate characterization of these materials including the crucially important preparation stage, the techniques used to reveal the microstructure and the analysis of the results.In particular, the book presents fundamental information on preparing polished sections of ceramics and ceramic composites including the main steps of sampling, sectioning, mounting and impregnation, and mechanical grinding, lapping and polishing. It discusses microstructural imaging in the optical microscope (OM) and the use of the scanning electron microscope (SEM). Etching or contrast enhancement following final polishing in order to reveal the material's microstructure is also covered.An entire chapter is devoted to material-specific preparation procedures for polished sections. These procedures take into account the properties of the ceramic or composite being examined and the purpose of the examination. They have proven to be very suitable for the respective materials and are effective for revealing the pores. The examples presented here for ceramics and ceramic composites provide polished sections of good to excellent quality for routine examination under the optical microscope. They include tips for etching and contrast enhancement, as well as microstructural images. Chapter 5 discusses the preparation of polished sections for purposes of examination and contains information on producing oblique sections and controlled removal of material. It also addresses the production of thin sections. As a complement to the examination of the microstructure, chapter 6 provides insight into the evaluation of hardness testing indentations. Chapter 7 concludes this work with an overview of the technical literature. Printbook.
3
Ceramics and Ceramic Composites: Materialographic Preparation
EN NWISBN: 9780444100306 bzw. 044410030X, in Englisch, Elsevier Science, neu.
Lieferung aus: Vereinigtes Königreich Großbritannien und Nordirland, 3-5 Days.
Ceramics and ceramic composites are now used in almost all areas of technology and have potential for even greater and more widespread applications. To make this a reality, it is increasingly necessary to understand the microstructure of the material and its relationship with properties and performance. Central to this is the characterization of the material, in particular using optical and scanning electron microscopy techniques. This book acts as an expert guide to the various steps necessary for successful and accurate characterization of these materials including the crucially important preparation stage, the techniques used to reveal the microstructure and the analysis of the results. In particular, the book presents fundamental information on preparing polished sections of ceramics and ceramic composites including the main steps of sampling, sectioning, mounting and impregnation, and mechanical grinding, lapping and polishing. It discusses microstructural imaging in the optical microscope (OM) and the use of the scanning electron microscope (SEM). Etching or contrast enhancement following final polishing in order to reveal the material's microstructure is also covered.An entire chapter is devoted to material-specific preparation procedures for polished sections. These procedures take into account the properties of the ceramic or composite being examined and the purpose of the examination. They have proven to be very suitable for the respective materials and are effective for revealing the pores. The examples presented here for ceramics and ceramic composites provide polished sections of good to excellent quality for routine examination under the optical microscope. They include tips for etching and contrast enhancement, as well as microstructural images. Chapter 5 discusses the preparation of polished sections for purposes of examination and contains information on producing oblique sections and controlled removal of material. It also addresses the production of thin sections. As a complement to the examination of the microstructure, chapter 6 provides insight into the evaluation of hardness testing indentations. Chapter 7 concludes this work with an overview of the technical literature.
Ceramics and ceramic composites are now used in almost all areas of technology and have potential for even greater and more widespread applications. To make this a reality, it is increasingly necessary to understand the microstructure of the material and its relationship with properties and performance. Central to this is the characterization of the material, in particular using optical and scanning electron microscopy techniques. This book acts as an expert guide to the various steps necessary for successful and accurate characterization of these materials including the crucially important preparation stage, the techniques used to reveal the microstructure and the analysis of the results. In particular, the book presents fundamental information on preparing polished sections of ceramics and ceramic composites including the main steps of sampling, sectioning, mounting and impregnation, and mechanical grinding, lapping and polishing. It discusses microstructural imaging in the optical microscope (OM) and the use of the scanning electron microscope (SEM). Etching or contrast enhancement following final polishing in order to reveal the material's microstructure is also covered.An entire chapter is devoted to material-specific preparation procedures for polished sections. These procedures take into account the properties of the ceramic or composite being examined and the purpose of the examination. They have proven to be very suitable for the respective materials and are effective for revealing the pores. The examples presented here for ceramics and ceramic composites provide polished sections of good to excellent quality for routine examination under the optical microscope. They include tips for etching and contrast enhancement, as well as microstructural images. Chapter 5 discusses the preparation of polished sections for purposes of examination and contains information on producing oblique sections and controlled removal of material. It also addresses the production of thin sections. As a complement to the examination of the microstructure, chapter 6 provides insight into the evaluation of hardness testing indentations. Chapter 7 concludes this work with an overview of the technical literature.
4
Ceramics and Ceramic Composites: Materialographic Preparation
EN NW EB DLISBN: 9780080528816 bzw. 0080528813, in Englisch, Elsevier Science, neu, E-Book, elektronischer Download.
Lieferung aus: Vereinigtes Königreich Großbritannien und Nordirland, Despatched same working day before 3pm.
Ceramics and ceramic composites are now used in almost all areas of technology and have potential for even greater and more widespread applications. To make this a reality, it is increasingly necessary to understand the microstructure of the material and its relationship with properties and performance. Central to this is the characterization of the material, in particular using optical and scanning electron microscopy techniques.This book acts as an expert guide to the various steps necessary for successful and accurate characterization of these materials including the crucially important preparation stage, the techniques used to reveal the microstructure and the analysis of the results.In particular, the book presents fundamental information on preparing polished sections of ceramics and ceramic composites including the main steps of sampling, sectioning, mounting and impregnation, and mechanical grinding, lapping and polishing. It discusses microstructural imaging in the optical microscope (OM) and the use of the scanning electron microscope (SEM). Etching or contrast enhancement following final polishing in order to reveal the material's microstructure is also covered.An entire chapter is devoted to material-specific preparation procedures for polished sections. These procedures take into account the properties of the ceramic or composite being examined and the purpose of the examination. They have proven to be very suitable for the respective materials and are effective for revealing the pores. The examples presented here for ceramics and ceramic composites provide polished sections of good to excellent quality for routine examination under the optical microscope. They include tips for etching and contrast enhancement, as well as microstructural images. Chapter 5 discusses the preparation of polished sections for purposes of examination and contains information on producing oblique sections and controlled removal of material. It also addresses the production of thin sections. As a complement to the examination of the microstructure, chapter 6 provides insight into the evaluation of hardness testing indentations. Chapter 7 concludes this work with an overview of the technical literature.
Ceramics and ceramic composites are now used in almost all areas of technology and have potential for even greater and more widespread applications. To make this a reality, it is increasingly necessary to understand the microstructure of the material and its relationship with properties and performance. Central to this is the characterization of the material, in particular using optical and scanning electron microscopy techniques.This book acts as an expert guide to the various steps necessary for successful and accurate characterization of these materials including the crucially important preparation stage, the techniques used to reveal the microstructure and the analysis of the results.In particular, the book presents fundamental information on preparing polished sections of ceramics and ceramic composites including the main steps of sampling, sectioning, mounting and impregnation, and mechanical grinding, lapping and polishing. It discusses microstructural imaging in the optical microscope (OM) and the use of the scanning electron microscope (SEM). Etching or contrast enhancement following final polishing in order to reveal the material's microstructure is also covered.An entire chapter is devoted to material-specific preparation procedures for polished sections. These procedures take into account the properties of the ceramic or composite being examined and the purpose of the examination. They have proven to be very suitable for the respective materials and are effective for revealing the pores. The examples presented here for ceramics and ceramic composites provide polished sections of good to excellent quality for routine examination under the optical microscope. They include tips for etching and contrast enhancement, as well as microstructural images. Chapter 5 discusses the preparation of polished sections for purposes of examination and contains information on producing oblique sections and controlled removal of material. It also addresses the production of thin sections. As a complement to the examination of the microstructure, chapter 6 provides insight into the evaluation of hardness testing indentations. Chapter 7 concludes this work with an overview of the technical literature.
5
Ceramics and Ceramic Composites
EN NWISBN: 9780444100306 bzw. 044410030X, in Englisch, North-Holland, neu.
Lieferung aus: Vereinigtes Königreich Großbritannien und Nordirland, in-stock.
Ceramics and ceramic composites are now used in almost all areas of technology and have potential for even greater and more widespread applications. To make this a reality, it is increasingly necessary to understand the microstructure of the material and its relationship with properties and performance. Central to this is the characterization of the material, in particular using optical and scanning electron microscopy techniques. This book acts as an expert guide to the various steps necessary for successful and accurate characterization of these materials including the crucially important preparation stage, the techniques used to reveal the microstructure and the analysis of the results. In particular, the book presents fundamental information on preparing polished sections of ceramics and ceramic composites including the main steps of sampling, sectioning, mounting and impregnation, and mechanical grinding, lapping and polishing. It discusses microstructural imaging in the optical microscope (OM) and the use of the scanning electron microscope (SEM). Etching or contrast enhancement following final polishing in order to reveal the material's microstructure is also covered. An entire chapter is devoted to material-specific preparation procedures for polished sections. These procedures take into account the properties of the ceramic or composite being examined and the purpose of the examination. They have proven to be very suitable for the respective materials and are effective for revealing the pores. The examples presented here for ceramics and ceramic composites provide polished sections of good to excellent quality for routine examination under the optical microscope. They include tips for etching and contrast enhancement, as well as microstructural images. Chapter 5 discusses the preparation of polished sections for purposes of examination and contains information on producing oblique sections and controlled removal of material. It.
Ceramics and ceramic composites are now used in almost all areas of technology and have potential for even greater and more widespread applications. To make this a reality, it is increasingly necessary to understand the microstructure of the material and its relationship with properties and performance. Central to this is the characterization of the material, in particular using optical and scanning electron microscopy techniques. This book acts as an expert guide to the various steps necessary for successful and accurate characterization of these materials including the crucially important preparation stage, the techniques used to reveal the microstructure and the analysis of the results. In particular, the book presents fundamental information on preparing polished sections of ceramics and ceramic composites including the main steps of sampling, sectioning, mounting and impregnation, and mechanical grinding, lapping and polishing. It discusses microstructural imaging in the optical microscope (OM) and the use of the scanning electron microscope (SEM). Etching or contrast enhancement following final polishing in order to reveal the material's microstructure is also covered. An entire chapter is devoted to material-specific preparation procedures for polished sections. These procedures take into account the properties of the ceramic or composite being examined and the purpose of the examination. They have proven to be very suitable for the respective materials and are effective for revealing the pores. The examples presented here for ceramics and ceramic composites provide polished sections of good to excellent quality for routine examination under the optical microscope. They include tips for etching and contrast enhancement, as well as microstructural images. Chapter 5 discusses the preparation of polished sections for purposes of examination and contains information on producing oblique sections and controlled removal of material. It.
6
Ceramics and Ceramic Composites: Materialographic Preparation
~EN NW EB DLISBN: 9780080528816 bzw. 0080528813, vermutlich in Englisch, Elsevier Science, neu, E-Book, elektronischer Download.
Lieferung aus: Deutschland, Versandkostenfrei.
Ceramics and Ceramic Composites: Materialographic Preparation: Ceramics and ceramic composites are now used in almost all areas of technology and have potential for even greater and more widespread applications. To make this a reality, it is increasingly necessary to understand the microstructure of the material and its relationship with properties and performance. Central to this is the characterization of the material, in particular using optical and scanning electron microscopy techniques.This book acts as an expert guide to the various steps necessary for successful and accurate characterization of these materials including the crucially important preparation stage, the techniques used to reveal the microstructure and the analysis of the results.In particular, the book presents fundamental information on preparing polished sections of ceramics and ceramic composites including the main steps of sampling, sectioning, mounting and impregnation, and mechanical grinding, lapping and polishing. It discusses microstructural imaging in the optical microscope (OM) and the use of the scanning electron microscope (SEM). Etching or contrast enhancement following final polishing in order to reveal the material`s microstructure is also covered.An entire chapter is devoted to material-specific preparation procedures for polished sections. These procedures take into account the properties of the ceramic or composite being examined and the purpose of the examination. They have proven to be very suitable for the respective materials and are effective for revealing the pores. The examples presented here for ceramics and ceramic composites provide polished sections of good to excellent quality for routine examination under the optical microscope. They include tips for etching and contrast enhancement, as well as microstructural images. Chapter 5 discusses the preparation of polished sections for purposes of examination and contains information on producing oblique sections and controlled removal of material. It also addresses the production of thin sections. As a complement to the examination of the microstructure, chapter 6 provides insight into the evaluation of hardness testing indentations. Chapter 7 concludes this work with an overview of the technical literature. Englisch, Ebook.
Ceramics and Ceramic Composites: Materialographic Preparation: Ceramics and ceramic composites are now used in almost all areas of technology and have potential for even greater and more widespread applications. To make this a reality, it is increasingly necessary to understand the microstructure of the material and its relationship with properties and performance. Central to this is the characterization of the material, in particular using optical and scanning electron microscopy techniques.This book acts as an expert guide to the various steps necessary for successful and accurate characterization of these materials including the crucially important preparation stage, the techniques used to reveal the microstructure and the analysis of the results.In particular, the book presents fundamental information on preparing polished sections of ceramics and ceramic composites including the main steps of sampling, sectioning, mounting and impregnation, and mechanical grinding, lapping and polishing. It discusses microstructural imaging in the optical microscope (OM) and the use of the scanning electron microscope (SEM). Etching or contrast enhancement following final polishing in order to reveal the material`s microstructure is also covered.An entire chapter is devoted to material-specific preparation procedures for polished sections. These procedures take into account the properties of the ceramic or composite being examined and the purpose of the examination. They have proven to be very suitable for the respective materials and are effective for revealing the pores. The examples presented here for ceramics and ceramic composites provide polished sections of good to excellent quality for routine examination under the optical microscope. They include tips for etching and contrast enhancement, as well as microstructural images. Chapter 5 discusses the preparation of polished sections for purposes of examination and contains information on producing oblique sections and controlled removal of material. It also addresses the production of thin sections. As a complement to the examination of the microstructure, chapter 6 provides insight into the evaluation of hardness testing indentations. Chapter 7 concludes this work with an overview of the technical literature. Englisch, Ebook.
7
Ceramics and Ceramic Composites: Materialographic Preparation
EN HC NWISBN: 9780444100306 bzw. 044410030X, in Englisch, Elsevier Science, gebundenes Buch, neu.
Lieferung aus: Vereinigte Staaten von Amerika, In Stock.
Ceramics-and-Ceramic-Composites~~G-Elssner, Ceramics and Ceramic Composites: Materialographic Preparation, Hardcover.
Ceramics-and-Ceramic-Composites~~G-Elssner, Ceramics and Ceramic Composites: Materialographic Preparation, Hardcover.
Lade…