Falls Sie nur an einem bestimmten Exempar interessiert sind, können Sie aus der folgenden Liste jenes wählen, an dem Sie interessiert sind:
Nur diese Ausgabe anzeigen…
Nur diese Ausgabe anzeigen…
Nur diese Ausgabe anzeigen…
Nur diese Ausgabe anzeigen…
Rotational Moulding of Plastics (Polymer Engineering Series, 2)
15 Angebote vergleichen
Bester Preis: € 71,43 (vom 22.03.2018)Rotational Moulding of Plastics (Polymer Engineering Series, 2) (1996)
ISBN: 9780863801945 bzw. 0863801943, in Englisch, Research Studies Pre, gebundenes Buch, gebraucht.
Item is intact, but may show shelf wear. Pages may include notes and highlighting. May or may not include supplemental or companion material. Access codes may or may not work. Connecting readers since 1972. Customer service is our top priority.
Rotational Moulding of Plastics (Polymer Engineering Series, 2) (1996)
ISBN: 9780863801945 bzw. 0863801943, in Englisch, 2. Ausgabe, Research Studies Pre, gebundenes Buch, gebraucht.
Von Händler/Antiquariat, HPB-Ohio, OH, Columbus, [RE:4].
Item is intact, but may show shelf wear. Pages may include notes and highlighting. May or may not include supplemental or companion material. Access codes may or may not work. Connecting readers since 1972. Customer service is our top priority. Hardcover, 2nd ed.
Rotational Moulding of Plastics (Polymer Engineering Series, No 1) (1992)
ISBN: 9780471937142 bzw. 0471937142, in Englisch, Research Studies Pr, gebundenes Buch, neu.
Von Händler/Antiquariat, scholarsattic.
Rotational moulding has been available as a processing method for hollow plastic products for more than forty years, but for a long time it was regarded as a slow method limited to only a few plastics. Now, there has been a dramatic change. Engineers and designers recognise the scope that rotational moulding offers for the production of relatively inexpensive, complex shapes with low levels of moulded-in stress. Materials suppliers are continually developing new grades of plastics as well as a wider selection of materials suited to the process. In addition, machinery suppliers are producing more sophisticated moulding equipment so that the moulder now has control over the process that was previously thought impossible. The second edition of this book, first published in 1992, has been extensively updated and expanded by its authors, who are leaders in their specialities within the field of rotational moulding. It provides an introduction to the subject, as well as giving comprehensive coverage of the state-of-the-art. There are new chapters on rotational moulding of liquid polymers and on pin-holes and bubbles in rotationally moulded products. It will surely be welcomed again by moulders, materials and equipment suppliers, engineers and designers, and by lecturers looking for up-to-date information to include in their courses. Hardcover, Étiquette: Research Studies Pr, Research Studies Pr, Groupe de produits: Book, Publié: 1992-10, Studio: Research Studies Pr, Vente de rang: 16094892.
Rotational Moulding of Plastics (Polymer Engineering Series, No 1) (1992)
ISBN: 9780471937142 bzw. 0471937142, in Englisch, Research Studies Pr, gebundenes Buch, neu.
Von Händler/Antiquariat, scholarsattic.
Rotational moulding has been available as a processing method for hollow plastic products for more than forty years, but for a long time it was regarded as a slow method limited to only a few plastics. Now, there has been a dramatic change. Engineers and designers recognise the scope that rotational moulding offers for the production of relatively inexpensive, complex shapes with low levels of moulded-in stress. Materials suppliers are continually developing new grades of plastics as well as a wider selection of materials suited to the process. In addition, machinery suppliers are producing more sophisticated moulding equipment so that the moulder now has control over the process that was previously thought impossible. The second edition of this book, first published in 1992, has been extensively updated and expanded by its authors, who are leaders in their specialities within the field of rotational moulding. It provides an introduction to the subject, as well as giving comprehensive coverage of the state-of-the-art. There are new chapters on rotational moulding of liquid polymers and on pin-holes and bubbles in rotationally moulded products. It will surely be welcomed again by moulders, materials and equipment suppliers, engineers and designers, and by lecturers looking for up-to-date information to include in their courses. Hardcover, Étiquette: Research Studies Pr, Research Studies Pr, Groupe de produits: Book, Publié: 1992-10, Studio: Research Studies Pr, Vente de rang: 16101502.
Rotational Moulding of Plastics (Polymer Engineering Series, No 1) (1992)
ISBN: 9780471937142 bzw. 0471937142, in Englisch, Research Studies Pr, gebundenes Buch, neu.
Von Händler/Antiquariat, scholarsattic.
Rotational moulding has been available as a processing method for hollow plastic products for more than forty years, but for a long time it was regarded as a slow method limited to only a few plastics. Now, there has been a dramatic change. Engineers and designers recognise the scope that rotational moulding offers for the production of relatively inexpensive, complex shapes with low levels of moulded-in stress. Materials suppliers are continually developing new grades of plastics as well as a wider selection of materials suited to the process. In addition, machinery suppliers are producing more sophisticated moulding equipment so that the moulder now has control over the process that was previously thought impossible. The second edition of this book, first published in 1992, has been extensively updated and expanded by its authors, who are leaders in their specialities within the field of rotational moulding. It provides an introduction to the subject, as well as giving comprehensive coverage of the state-of-the-art. There are new chapters on rotational moulding of liquid polymers and on pin-holes and bubbles in rotationally moulded products. It will surely be welcomed again by moulders, materials and equipment suppliers, engineers and designers, and by lecturers looking for up-to-date information to include in their courses. Hardcover, Étiquette: Research Studies Pr, Research Studies Pr, Groupe de produits: Book, Publié: 1992-10, Studio: Research Studies Pr, Vente de rang: 16109533.
Rotational Moulding of Plastics (Polymer Engineering) (1992)
ISBN: 9780863801389 bzw. 0863801382, in Englisch, Research Studies Press, gebundenes Buch, gebraucht.
Item may show signs of shelf wear. Pages may include limited notes and highlighting. Includes supplemental or companion materials if applicable. Access codes may or may not work. Connecting readers since 1972. Customer service is our top priority.
Rotational Moulding of Plastics (Polymer Engineering Series, No 1) (1992)
ISBN: 9780471937142 bzw. 0471937142, in Englisch, Research Studies Pr, gebundenes Buch, neu.
Von Händler/Antiquariat, scholarsattic.
Rotational moulding has been available as a processing method for hollow plastic products for more than forty years, but for a long time it was regarded as a slow method limited to only a few plastics. Now, there has been a dramatic change. Engineers and designers recognise the scope that rotational moulding offers for the production of relatively inexpensive, complex shapes with low levels of moulded-in stress. Materials suppliers are continually developing new grades of plastics as well as a wider selection of materials suited to the process. In addition, machinery suppliers are producing more sophisticated moulding equipment so that the moulder now has control over the process that was previously thought impossible. The second edition of this book, first published in 1992, has been extensively updated and expanded by its authors, who are leaders in their specialities within the field of rotational moulding. It provides an introduction to the subject, as well as giving comprehensive coverage of the state-of-the-art. There are new chapters on rotational moulding of liquid polymers and on pin-holes and bubbles in rotationally moulded products. It will surely be welcomed again by moulders, materials and equipment suppliers, engineers and designers, and by lecturers looking for up-to-date information to include in their courses. Hardcover, Label: Research Studies Pr, Research Studies Pr, Produktgruppe: Book, Publiziert: 1992-10, Studio: Research Studies Pr, Verkaufsrang: 15537193.
Rotational Moulding of Plastics (Polymer Engineering) (1992)
ISBN: 9780863801389 bzw. 0863801382, in Englisch, Research Studies Press, gebundenes Buch, gebraucht.
Von Händler/Antiquariat, HPB-Ohio, OH, Columbus, [RE:4].
Item may show signs of shelf wear. Pages may include limited notes and highlighting. Includes supplemental or companion materials if applicable. Access codes may or may not work. Connecting readers since 1972. Customer service is our top priority. Hardcover.
Rotational Moulding of Plastics
ISBN: 0863801943 bzw. 9780863801945, in Englisch, Research Studies Press Limited, gebraucht.
chemical,chemical engineering,engineering,science and math,science and math,technology,textbooks, This text provides both an introduction to rotational moulding and comprehensive coverage of the state of the art. It has been completely revised, and extra material added, including new chapters on moulding of liquid polymers and on pin-holes and bubbles in rotationally moulded products. The book is applicable both to industrial users and to academics. It is supported by the Association of Rotational Moulders, based in Chicago, Illinois, USA.
Rotational Moulding of Plastics (Polymer Engineering) (1992)
ISBN: 9780863801389 bzw. 0863801382, in Englisch, Research Studies Press, gebundenes Buch, gebraucht.
Von Händler/Antiquariat, booklab, VA, Chantilly, [RE:3].
Great customer service. You will be happy! Hardcover.