Engineering With Rubber - 13 Angebote vergleichen

Lieferung aus: Vereinigte Staaten von Amerika, Usually ships in 24 hours.
Von Händler/Antiquariat, Amazon.com.
ENGINEERING WITH RUBBER Edited by WALTER K. BURTON. Originally published in 1919. PREFACE: When man sots out to build and market a new product a machine for removing dents from automobile fenders, for example he may decide that some rubber parts are needed. He finds it necessary, therefore, to know some of the engineering, application, and design principles involving rubber hose, gaskets, and molded pieces of rubber. In looking about for information, he can pick up a helpful fact here and there from manufacturers pamphlets, folders, and booklets but sometimes he gets lost in a maze of words and pictures. Perhaps he consults the engineering department of some rubber manufacturer but, more likely than not, he goes ahead with his designing, making what he thinks are the proper provisions for whatever rubber parts he expects to include. Then, much too late, he establishes contact with rubber technicians and learns that he will have to make radical changes in design in order to take advantage of their recommendations. To help eliminate this confusion, the editor collaborated with The B. F. Goodrich Company, Akron, Ohio, to gather material for a book dealing with industrial rubber products and their application to industrial uses. This volume is the result. It summarizes, in convenient form, much of the miscellaneous information that was scattered through countless folders, booklets, catalogue pages, price sheet - s, and the minds of technicians. It provides basic information to start the reader on the right track and to induce him, if he happens to be a product designer, to consult with rubber men in the early blueprint stage of a new product. In order to obtain a clear idea of what design engineers and others would like to see in such a volume, an extensive mail survey was conducted and manufacturers were visited personally. Many of the ideas and suggestions that they contributed have been included in this text. The book deals with specific subjects, such as kinds of rubber and their properties, adhesives, latex products, belting, hose, molded and extruded parts, coverings and linings, gaskets, sponge rubber, hard rubber, and rubber mountings. The more important American-made rubbers, formerly classed as synthetic rubber, are included, as are some non rubber materials such as plasticized polyvinyl chloride. The book contains basic information on physical and chemical proper vi Preface ties of various rubber compounds, structural details of industrial rubber products, and typical dimensions. Because of the continuous, rapid growth of rubber science and engineering, many of the precise values in this book may be subject to modification from time to time. It might seem that such a book would make it less necessary for the potential user of industrial rubber to consult a rubber technician or manufacturer for assistance in planning a new product or application... Hardcover, Label: Deutsch Press, Deutsch Press, Produktgruppe: Book, Publiziert: 2008-11-04, Studio: Deutsch Press, Verkaufsrang: 9020744.

Lieferung aus: Vereinigte Staaten von Amerika, Usually ships in 1-2 business days.
Von Händler/Antiquariat, super_star_seller.
ENGINEERING WITH RUBBER Edited by WALTER K. BURTON. Originally published in 1919. PREFACE: When man sots out to build and market a new product a machine for removing dents from automobile fenders, for example he may decide that some rubber parts are needed. He finds it necessary, therefore, to know some of the engineering, application, and design principles involving rubber hose, gaskets, and molded pieces of rubber. In looking about for information, he can pick up a helpful fact here and there from manufacturers pamphlets, folders, and booklets but sometimes he gets lost in a maze of words and pictures. Perhaps he consults the engineering department of some rubber manufacturer but, more likely than not, he goes ahead with his designing, making what he thinks are the proper provisions for whatever rubber parts he expects to include. Then, much too late, he establishes contact with rubber technicians and learns that he will have to make radical changes in design in order to take advantage of their recommendations. To help eliminate this confusion, the editor collaborated with The B. F. Goodrich Company, Akron, Ohio, to gather material for a book dealing with industrial rubber products and their application to industrial uses. This volume is the result. It summarizes, in convenient form, much of the miscellaneous information that was scattered through countless folders, booklets, catalogue pages, price sheet - s, and the minds of technicians. It provides basic information to start the reader on the right track and to induce him, if he happens to be a product designer, to consult with rubber men in the early blueprint stage of a new product. In order to obtain a clear idea of what design engineers and others would like to see in such a volume, an extensive mail survey was conducted and manufacturers were visited personally. Many of the ideas and suggestions that they contributed have been included in this text. The book deals with specific subjects, such as kinds of rubber and their properties, adhesives, latex products, belting, hose, molded and extruded parts, coverings and linings, gaskets, sponge rubber, hard rubber, and rubber mountings. The more important American-made rubbers, formerly classed as synthetic rubber, are included, as are some non rubber materials such as plasticized polyvinyl chloride. The book contains basic information on physical and chemical proper vi Preface ties of various rubber compounds, structural details of industrial rubber products, and typical dimensions. Because of the continuous, rapid growth of rubber science and engineering, many of the precise values in this book may be subject to modification from time to time. It might seem that such a book would make it less necessary for the potential user of industrial rubber to consult a rubber technician or manufacturer for assistance in planning a new product or application... Hardcover, Label: Deutsch Press, Deutsch Press, Produktgruppe: Book, Publiziert: 2008-11-04, Studio: Deutsch Press, Verkaufsrang: 9020744.

Lieferung aus: Niederlande, Vermoedelijk 2-3 weken.
bol.com.
ENGINEERING WITH RUBBER Edited by WALTER K. BURTON 1919 FRONTISPIECE. Typical of rubbers diversified industrial application is this Torsilastic rubber spring, which can be engineered to serve as the suspension member for thou sands of industrial, commercial, and automotive uses including stationary motors, industrial trucks, office chairs, railroad coaches, passenger cars, trucks, buses, airplane landing gear, farm implements, drilling equipment, seats of all types, door hinges and springs, stre... ENGINEERING WITH RUBBER Edited by WALTER K. BURTON 1919 FRONTISPIECE. Typical of rubbers diversified industrial application is this Torsilastic rubber spring, which can be engineered to serve as the suspension member for thou sands of industrial, commercial, and automotive uses including stationary motors, industrial trucks, office chairs, railroad coaches, passenger cars, trucks, buses, airplane landing gear, farm implements, drilling equipment, seats of all types, door hinges and springs, streetcars, motorcycles, physical-exercising equipment, truck tail gates, wagons, bicycles, and even built-in ironing boards and rocking chairs. Copyright, 1949, All rights reserved. This hook, or parts thereof, may not be reproduced in any form without permission of the publishers PREFACE When man sots out to build and market a new product a machine for removing dents from automobile fenders, for example he may decide that some rubber parts are needed. He finds it necessary, therefore, to know some of the engineering, application, and design principles involving rubber hose, gaskets, and molded pieces of rubber. In looking about for information, he can pick up a helpful fact here and there from manufacturers pamphlets, folders, and booklets but sometimes he gets lost in a maze of words and pictures. Perhaps he consults the engineering department of some rubber manufacturer but, more likely than not, he goes ahead with his designing, making what he thinks are the proper provisions for whatever rubber parts he expects to include. Then, much too late, he establishes contact with rubber technicians and learns that he will have to make radical changes in design in order to take advantage of theirrecommendations. To help eliminate this confusion, the editor collaborated with The B. F. Goodrich Company, Akron, Ohio, to gather material for a book dealing with industrial rubber products and their application to industrial uses. This volume is the result. It summarizes, in convenient form, much of the miscellaneous information that was scattered through countless folders, booklets, catalogue pages, price sheet - s, and the minds of technicians. It provides basic information to start the reader on the right track and to induce him, if he happens to be a product designer, to consult with rubber men in the early blueprint stage of a new product. In order to obtain a clear idea of what design engineers and others would like to see in such a volume, an extensive mail survey was conducted and manufacturers were visited personally. Many of the ideas and suggestions that they contributed have been included in this text. The book deals with specific subjects, such as kinds of rubber and their properties, adhesives, latex products, belting, hose, molded and extruded parts, coverings and linings, gaskets, sponge rubber, hard rubber, and rubber mountings. The more important American-made rubbers, formerly classed as synthetic rubber, are included, as are some non rubber materials such as plasticized polyvinyl chloride. The book contains basic information on physical and chemical proper vi Preface ties of various rubber compounds, structural details of industrial rubber products, and typical dimensions. Because of the continuous, rapid growth of rubber science and engineering, many of the precise values in this book may be subject to modification from time to time. It might seem that such a bookwould make it less necessary for the potential user of industrial rubber to consult a rubber technician or manufacturer for assistance in planning a new product or application... Productinformatie:Taal: Engels;Afmetingen: 31x216x140 mm;Gewicht: 781,00 gram;ISBN10: 1443720798;ISBN13: 9781443720793; Engels | Hardcover | 2008.

Lieferung aus: Niederlande, 5-10 werkdagen.
bol.com.
Many of the earliest books, particularly those dating back to the 1900s and before, are now extremely scarce and increasingly expensive. We are republishing these classic works in affordable, high quality, modern editions, using the original text and artwork. Productinformatie:Taal: Engels;Afmetingen: 28x216x140 mm;Gewicht: 625,00 gram;ISBN10: 1406701483;ISBN13: 9781406701487; Engels | Paperback | 2007.

Lieferung aus: Vereinigte Staaten von Amerika, zzgl. Versandkosten, Versandgebiet: DOM.
Von Händler/Antiquariat, Tustin, CA, Newport Coast, [RE:4].
Access codes and supplements are not guaranteed with used items. May be an ex-library book. hardcover.

Lieferung aus: Deutschland, zzgl. Versandkosten, Versandfertig in 5 - 7 Tagen.
Engineering with Rubber, Many of the earliest books, particularly those dating back to the 1900s and before, are now extremely scarce and increasingly expensive. We are republishing these classic works in affordable, high quality, modern editions, using the original text and artwork.

Lieferung aus: Kanada, Usually ships within 1 - 2 business days.
Von Händler/Antiquariat, Daily-Deal-.
Paperback, Label: Deutsch Press, Deutsch Press, Produktgruppe: Book, Publiziert: 2007-03-15, Studio: Deutsch Press.

Lieferung aus: Kanada, Usually ships in 24 hours.
Von Händler/Antiquariat, Amazon.ca.
Die Beschreibung dieses Angebotes ist von geringer Qualität oder in einer Fremdsprache. Trotzdem anzeigen

Lieferung aus: Deutschland, zzgl. Versandkosten, Shipping in 2 weeks.
*Engineering With Rubber* / gebundene Ausgabe für 43.99 € / Aus dem Bereich: Bücher, Wissenschaft, Geschichte.

Von Händler/Antiquariat, moluna [73551232], Greven, Germany.
Books.