NEW Automotive Adhesives, Sealants And Coatings 2008 BOOK (Paperback) Free P&H
5 Angebote vergleichen
Bester Preis: € 9,80 (vom 06.04.2017)1
Automotive Adhesives, Sealants and Coatings 2008 (2008)
EN PB NWISBN: 9781847350725 bzw. 1847350720, in Englisch, 174 Seiten, Smithers Rapra Technology, Taschenbuch, neu.
جديد من: £24.27 (13 ويقدم)
تستخدم من: £8.37 (4 ويقدم)
إظهار المزيد 17 ويقدم في Amazon.co.uk
Lieferung aus: Vereinigtes Königreich Großbritannien und Nordirland, Usually dispatched within 1-2 business days, بالإضافة إلى الشحن (في حالة شحنها).
Von Händler/Antiquariat, rbmbooks.
In recent years a series of environmental and end-of-life regulations in the automotive sector has triggered significant changes in vehicle design and manufacture on a global scale. The call for improved fuel efficiency and safety, increased passenger comfort, and a reduction in the emission of pollutants has seen the introduction of new materials and manufacturing techniques to develop lighter, more efficient vehicles. To these requirements has been added the need to re-design vehicles with disassembly, materials re-use and recovery in mind. These trends have had a big impact on the adhesives, sealants and coatings markets. Adhesives, sealants and coatings are found in just about every area of a car. For example structural and semi-structural adhesives (such as epoxies and polyurethanes) and sound deadening materials are now used between layers of body shell in favour of traditional mechanical fasteners, thereby reducing weight and corrosion. Adhesives also find widespread use in joining plastics and composites, both to themselves and to metals. Similarly windscreens are now bonded-in structural components to improve vehicle stiffness and crash protection. However all of these elastomeric/resinous materials are sources of odour and volatile organic compounds (VOCs) and are therefore subject to EU REACh legislation. Today much is being done to replace low-solids solvent-based adhesives, sealants and coatings with a new generation of waterborne or hot melt formulations. These do not release VOCs on curing but still retain the aesthetic and protective qualities that the industry demands. With these green challenges in mind, Smithers Rapra brought together the automotive supply chain to discuss the latest research and development in this fast moving area and discover how today's automotive manufacturer can satisfy the conflicting demands of the consumer and the regulator. Paperback, التسمية: Smithers Rapra Technology, Smithers Rapra Technology, مجموعة المنتجات: Book, ونشرت: 2008-06-10, تاريخ الإصدار: 2008-06-10, ستوديو: Smithers Rapra Technology.
Von Händler/Antiquariat, rbmbooks.
In recent years a series of environmental and end-of-life regulations in the automotive sector has triggered significant changes in vehicle design and manufacture on a global scale. The call for improved fuel efficiency and safety, increased passenger comfort, and a reduction in the emission of pollutants has seen the introduction of new materials and manufacturing techniques to develop lighter, more efficient vehicles. To these requirements has been added the need to re-design vehicles with disassembly, materials re-use and recovery in mind. These trends have had a big impact on the adhesives, sealants and coatings markets. Adhesives, sealants and coatings are found in just about every area of a car. For example structural and semi-structural adhesives (such as epoxies and polyurethanes) and sound deadening materials are now used between layers of body shell in favour of traditional mechanical fasteners, thereby reducing weight and corrosion. Adhesives also find widespread use in joining plastics and composites, both to themselves and to metals. Similarly windscreens are now bonded-in structural components to improve vehicle stiffness and crash protection. However all of these elastomeric/resinous materials are sources of odour and volatile organic compounds (VOCs) and are therefore subject to EU REACh legislation. Today much is being done to replace low-solids solvent-based adhesives, sealants and coatings with a new generation of waterborne or hot melt formulations. These do not release VOCs on curing but still retain the aesthetic and protective qualities that the industry demands. With these green challenges in mind, Smithers Rapra brought together the automotive supply chain to discuss the latest research and development in this fast moving area and discover how today's automotive manufacturer can satisfy the conflicting demands of the consumer and the regulator. Paperback, التسمية: Smithers Rapra Technology, Smithers Rapra Technology, مجموعة المنتجات: Book, ونشرت: 2008-06-10, تاريخ الإصدار: 2008-06-10, ستوديو: Smithers Rapra Technology.
2
Automotive Adhesives, Sealants and Coatings 2008 (2008)
EN PB NWISBN: 9781847350725 bzw. 1847350720, in Englisch, 174 Seiten, Smithers Rapra Technology, Taschenbuch, neu.
Lieferung aus: Vereinigte Staaten von Amerika, Usually ships in 1-2 business days.
Von Händler/Antiquariat, _nearfine_.
In recent years a series of environmental and end-of-life regulations in the automotive sector has triggered significant changes in vehicle design and manufacture on a global scale. The call for improved fuel efficiency and safety, increased passenger comfort, and a reduction in the emission of pollutants has seen the introduction of new materials and manufacturing techniques to develop lighter, more efficient vehicles. To these requirements has been added the need to re-design vehicles with disassembly, materials re-use and recovery in mind. These trends have had a big impact on the adhesives, sealants and coatings markets. Adhesives, sealants and coatings are found in just about every area of a car. For example structural and semi-structural adhesives (such as epoxies and polyurethanes) and sound deadening materials are now used between layers of body shell in favour of traditional mechanical fasteners, thereby reducing weight and corrosion. Adhesives also find widespread use in joining plastics and composites, both to themselves and to metals. Similarly windscreens are now bonded-in structural components to improve vehicle stiffness and crash protection. However all of these elastomeric/resinous materials are sources of odour and volatile organic compounds (VOCs) and are therefore subject to EU REACh legislation. Today much is being done to replace low-solids solvent-based adhesives, sealants and coatings with a new generation of waterborne or hot melt formulations. These do not release VOCs on curing but still retain the aesthetic and protective qualities that the industry demands. With these green challenges in mind, Smithers Rapra brought together the automotive supply chain to discuss the latest research and development in this fast moving area and discover how today's automotive manufacturer can satisfy the conflicting demands of the consumer and the regulator. Paperback, Label: Smithers Rapra Technology, Smithers Rapra Technology, Produktgruppe: Book, Publiziert: 2008-06-10, Studio: Smithers Rapra Technology, Verkaufsrang: 10759839.
Von Händler/Antiquariat, _nearfine_.
In recent years a series of environmental and end-of-life regulations in the automotive sector has triggered significant changes in vehicle design and manufacture on a global scale. The call for improved fuel efficiency and safety, increased passenger comfort, and a reduction in the emission of pollutants has seen the introduction of new materials and manufacturing techniques to develop lighter, more efficient vehicles. To these requirements has been added the need to re-design vehicles with disassembly, materials re-use and recovery in mind. These trends have had a big impact on the adhesives, sealants and coatings markets. Adhesives, sealants and coatings are found in just about every area of a car. For example structural and semi-structural adhesives (such as epoxies and polyurethanes) and sound deadening materials are now used between layers of body shell in favour of traditional mechanical fasteners, thereby reducing weight and corrosion. Adhesives also find widespread use in joining plastics and composites, both to themselves and to metals. Similarly windscreens are now bonded-in structural components to improve vehicle stiffness and crash protection. However all of these elastomeric/resinous materials are sources of odour and volatile organic compounds (VOCs) and are therefore subject to EU REACh legislation. Today much is being done to replace low-solids solvent-based adhesives, sealants and coatings with a new generation of waterborne or hot melt formulations. These do not release VOCs on curing but still retain the aesthetic and protective qualities that the industry demands. With these green challenges in mind, Smithers Rapra brought together the automotive supply chain to discuss the latest research and development in this fast moving area and discover how today's automotive manufacturer can satisfy the conflicting demands of the consumer and the regulator. Paperback, Label: Smithers Rapra Technology, Smithers Rapra Technology, Produktgruppe: Book, Publiziert: 2008-06-10, Studio: Smithers Rapra Technology, Verkaufsrang: 10759839.
3
Automotive Adhesives, Sealants and Coatings 2008 (2008)
EN PB USISBN: 9781847350725 bzw. 1847350720, in Englisch, 174 Seiten, Smithers Rapra Technology, Taschenbuch, gebraucht.
Lieferung aus: Vereinigte Staaten von Amerika, Usually ships in 4-5 business days.
Von Händler/Antiquariat, Serendipity UnLtd.
In recent years a series of environmental and end-of-life regulations in the automotive sector has triggered significant changes in vehicle design and manufacture on a global scale. The call for improved fuel efficiency and safety, increased passenger comfort, and a reduction in the emission of pollutants has seen the introduction of new materials and manufacturing techniques to develop lighter, more efficient vehicles. To these requirements has been added the need to re-design vehicles with disassembly, materials re-use and recovery in mind. These trends have had a big impact on the adhesives, sealants and coatings markets. Adhesives, sealants and coatings are found in just about every area of a car. For example structural and semi-structural adhesives (such as epoxies and polyurethanes) and sound deadening materials are now used between layers of body shell in favour of traditional mechanical fasteners, thereby reducing weight and corrosion. Adhesives also find widespread use in joining plastics and composites, both to themselves and to metals. Similarly windscreens are now bonded-in structural components to improve vehicle stiffness and crash protection. However all of these elastomeric/resinous materials are sources of odour and volatile organic compounds (VOCs) and are therefore subject to EU REACh legislation. Today much is being done to replace low-solids solvent-based adhesives, sealants and coatings with a new generation of waterborne or hot melt formulations. These do not release VOCs on curing but still retain the aesthetic and protective qualities that the industry demands. With these green challenges in mind, Smithers Rapra brought together the automotive supply chain to discuss the latest research and development in this fast moving area and discover how today's automotive manufacturer can satisfy the conflicting demands of the consumer and the regulator. Paperback, Label: Smithers Rapra Technology, Smithers Rapra Technology, Produktgruppe: Book, Publiziert: 2008-06-10, Studio: Smithers Rapra Technology, Verkaufsrang: 10759839.
Von Händler/Antiquariat, Serendipity UnLtd.
In recent years a series of environmental and end-of-life regulations in the automotive sector has triggered significant changes in vehicle design and manufacture on a global scale. The call for improved fuel efficiency and safety, increased passenger comfort, and a reduction in the emission of pollutants has seen the introduction of new materials and manufacturing techniques to develop lighter, more efficient vehicles. To these requirements has been added the need to re-design vehicles with disassembly, materials re-use and recovery in mind. These trends have had a big impact on the adhesives, sealants and coatings markets. Adhesives, sealants and coatings are found in just about every area of a car. For example structural and semi-structural adhesives (such as epoxies and polyurethanes) and sound deadening materials are now used between layers of body shell in favour of traditional mechanical fasteners, thereby reducing weight and corrosion. Adhesives also find widespread use in joining plastics and composites, both to themselves and to metals. Similarly windscreens are now bonded-in structural components to improve vehicle stiffness and crash protection. However all of these elastomeric/resinous materials are sources of odour and volatile organic compounds (VOCs) and are therefore subject to EU REACh legislation. Today much is being done to replace low-solids solvent-based adhesives, sealants and coatings with a new generation of waterborne or hot melt formulations. These do not release VOCs on curing but still retain the aesthetic and protective qualities that the industry demands. With these green challenges in mind, Smithers Rapra brought together the automotive supply chain to discuss the latest research and development in this fast moving area and discover how today's automotive manufacturer can satisfy the conflicting demands of the consumer and the regulator. Paperback, Label: Smithers Rapra Technology, Smithers Rapra Technology, Produktgruppe: Book, Publiziert: 2008-06-10, Studio: Smithers Rapra Technology, Verkaufsrang: 10759839.
4
Automotive Adhesives, Sealants and Coatings 2008 (2008, Paperback)
EN PB NWISBN: 9781847350725 bzw. 1847350720, in Englisch, Taschenbuch, neu.
Lieferung aus: Vereinigte Staaten von Amerika, نوع التسليم: Free, التسليم: Vereinigte Staaten von Amerika, موقع العرض: USA, الشحن المجاني.
Von Händler/Antiquariat, barnesandnobleinc - Barnes and Noble Store.
Sold directly by Barnes & Noble, سعر ثابت.
Von Händler/Antiquariat, barnesandnobleinc - Barnes and Noble Store.
Sold directly by Barnes & Noble, سعر ثابت.
5
Automotive Adhesives, Sealants and Coatings 2008 (2008)
EN PB USISBN: 9781847350725 bzw. 1847350720, in Englisch, 174 Seiten, Smithers Rapra Technology, Taschenbuch, gebraucht.
Lieferung aus: Kanada, Usually ships within 1 - 2 business days.
Von Händler/Antiquariat, calibris.
Die Beschreibung dieses Angebotes ist von geringer Qualität oder in einer Fremdsprache. Trotzdem anzeigen
Von Händler/Antiquariat, calibris.
Die Beschreibung dieses Angebotes ist von geringer Qualität oder in einer Fremdsprache. Trotzdem anzeigen
Lade…