Binary Systems and Ternary Systems from C-Cr-Fe to Cr-Fe-W
8 Angebote vergleichen
| Preise | 2012 | 2013 | 2014 | 2015 | 2019 |
|---|---|---|---|---|---|
| Schnitt | € 2.885,54 | € 4.728,79 | € 4.778,49 | € 5.728,28 | € 4.256,91 |
| Nachfrage |
1
Binary Systems and Ternary Systems from C-Cr-Fe to Cr-Fe-W
DE HC NWISBN: 9783540881414 bzw. 3540881417, in Deutsch, Springer, Berlin, gebundenes Buch, neu.
Lieferung aus: Deutschland, Versandkostenfrei.
buecher.de GmbH & Co. KG, [1].
Following the publication of a first set of four volumes of SGTE compiled thermodynamic properties of inorganic substances, which dealt with pure substances (Subvolume A) and a second set of five volumes with selected thermodynamic data for binary alloy systems (Subvolume B), this set of volumes focuses on data for ternary systems for one vitally important specific class of materials, steels. Various diagrams for each system are presented, calculated from a specially developed SGTE database for steels. Background information is also presented for each system. The fundamental equations used in evaluating the data are given in the introduction to the volumes and the models used in representing the data are also described. For this volume a steel database has been compiled, consisting of 11 elements: Fe, C, N, Cr, Mn, Mo, Ni, Si, Ti, V, and W. With this selection of elements a broad range of steels and cast irons is covered. The database allows not only calculations within the included assessed systems but it is also capable of interpolating into regions which are not well-known. Typical steel databases are confined to the Fe-rich corner. Contrary to that the present compilation covers the composition range of all evaluated systems as much as possible.2012. xx, 401 S. 564 SW-Abb.,. 270 mmVersandfertig in 3-5 Tagen, Hardcover.
buecher.de GmbH & Co. KG, [1].
Following the publication of a first set of four volumes of SGTE compiled thermodynamic properties of inorganic substances, which dealt with pure substances (Subvolume A) and a second set of five volumes with selected thermodynamic data for binary alloy systems (Subvolume B), this set of volumes focuses on data for ternary systems for one vitally important specific class of materials, steels. Various diagrams for each system are presented, calculated from a specially developed SGTE database for steels. Background information is also presented for each system. The fundamental equations used in evaluating the data are given in the introduction to the volumes and the models used in representing the data are also described. For this volume a steel database has been compiled, consisting of 11 elements: Fe, C, N, Cr, Mn, Mo, Ni, Si, Ti, V, and W. With this selection of elements a broad range of steels and cast irons is covered. The database allows not only calculations within the included assessed systems but it is also capable of interpolating into regions which are not well-known. Typical steel databases are confined to the Fe-rich corner. Contrary to that the present compilation covers the composition range of all evaluated systems as much as possible.2012. xx, 401 S. 564 SW-Abb.,. 270 mmVersandfertig in 3-5 Tagen, Hardcover.
2
Symbolbild
Binary Systems and Ternary Systems from C-Cr-Fe to Cr-Fe-W (2012)
DE NW RPISBN: 9783540881414 bzw. 3540881417, in Deutsch, Springer Apr 2012, neu, Nachdruck.
Von Händler/Antiquariat, AHA-BUCH GmbH [51283250], Einbeck, Germany.
This item is printed on demand - Print on Demand Titel. Neuware - Following the publication of a first set of four volumes of SGTE compiled thermodynamic properties of inorganic substances, which dealt with pure substances (Subvolume A) and a second set of five volumes with selected thermodynamic data for binary alloy systems (Subvolume B), this set of volumes focuses on data for ternary systems for one vitally important specific class of materials, steels. Various diagrams for each system are presented, calculated from a specially developed SGTE database for steels. Background information is also presented for each system. The fundamental equations used in evaluating the data are given in the introduction to the volumes and the models used in representing the data are also described. For this volume a steel database has been compiled, consisting of 11 elements: Fe, C, N, Cr, Mn, Mo, Ni, Si, Ti, V, and W. With this selection of elements a broad range of steels and cast irons is covered. The database allows not only calculations within the included assessed systems but it is also capable of interpolating into regions which are not well-known. Typical steel databases are confined to the Fe-rich corner. Contrary to that the present compilation covers the composition range of all evaluated systems as much as possible. 401 pp. Englisch.
This item is printed on demand - Print on Demand Titel. Neuware - Following the publication of a first set of four volumes of SGTE compiled thermodynamic properties of inorganic substances, which dealt with pure substances (Subvolume A) and a second set of five volumes with selected thermodynamic data for binary alloy systems (Subvolume B), this set of volumes focuses on data for ternary systems for one vitally important specific class of materials, steels. Various diagrams for each system are presented, calculated from a specially developed SGTE database for steels. Background information is also presented for each system. The fundamental equations used in evaluating the data are given in the introduction to the volumes and the models used in representing the data are also described. For this volume a steel database has been compiled, consisting of 11 elements: Fe, C, N, Cr, Mn, Mo, Ni, Si, Ti, V, and W. With this selection of elements a broad range of steels and cast irons is covered. The database allows not only calculations within the included assessed systems but it is also capable of interpolating into regions which are not well-known. Typical steel databases are confined to the Fe-rich corner. Contrary to that the present compilation covers the composition range of all evaluated systems as much as possible. 401 pp. Englisch.
3
Binary Systems and Ternary Systems from C-Cr-Fe to Cr-Fe-W
~EN HC NWISBN: 9783540881414 bzw. 3540881417, vermutlich in Englisch, Springer Shop, gebundenes Buch, neu.
Lieferung aus: Mexiko, Lagernd, zzgl. Versandkosten.
Following the publication of a first set of four volumes of SGTE compiled thermodynamic properties of inorganic substances, which dealt with pure substances (Subvolume A) and a second set of five volumes with selected thermodynamic data for binary alloy systems (Subvolume B), this set of volumes focuses on data for ternary systems for one vitally important specific class of materials, steels. Various diagrams for each system are presented, calculated from a specially developed SGTE database for steels. Background information is also presented for each system. The fundamental equations used in evaluating the data are given in the introduction to the volumes and the models used in representing the data are also described. For this volume a steel database has been compiled, consisting of 11 elements: Fe, C, N, Cr, Mn, Mo, Ni, Si, Ti, V, and W. With this selection of elements a broad range of steels and cast irons is covered. The database allows not only calculations within the included assessed systems but it is also capable of interpolating into regions which are not well-known. Typical steel databases are confined to the Fe-rich corner. Contrary to that the present compilation covers the composition range of all evaluated systems as much as possible. Hard cover.
Following the publication of a first set of four volumes of SGTE compiled thermodynamic properties of inorganic substances, which dealt with pure substances (Subvolume A) and a second set of five volumes with selected thermodynamic data for binary alloy systems (Subvolume B), this set of volumes focuses on data for ternary systems for one vitally important specific class of materials, steels. Various diagrams for each system are presented, calculated from a specially developed SGTE database for steels. Background information is also presented for each system. The fundamental equations used in evaluating the data are given in the introduction to the volumes and the models used in representing the data are also described. For this volume a steel database has been compiled, consisting of 11 elements: Fe, C, N, Cr, Mn, Mo, Ni, Si, Ti, V, and W. With this selection of elements a broad range of steels and cast irons is covered. The database allows not only calculations within the included assessed systems but it is also capable of interpolating into regions which are not well-known. Typical steel databases are confined to the Fe-rich corner. Contrary to that the present compilation covers the composition range of all evaluated systems as much as possible. Hard cover.
4
/ Seifert | Binary Systems and Ternary Systems from C-Cr-Fe to Cr-Fe-W | Springer | 2012
~EN NWISBN: 9783540881414 bzw. 3540881417, vermutlich in Englisch, Springer, neu.
Following the publication of a first set of four volumes of SGTE compiled thermodynamic properties of inorganic substances, which dealt with pure substances (Subvolume A) and a second set of five volumes with selected thermodynamic data for binary alloy systems (Subvolume B), this set of volumes focuses on data for ternary systems for one vitally important specific class of materials, steels. Various diagrams for each system are presented, calculated from a specially developed SGTE database for steels. Background information is also presented for each system. The fundamental equations used in evaluating the data are given in the introduction to the volumes and the models used in representing the data are also described. For this volume a steel database has been compiled, consisting of 11 elements: Fe, C, N, Cr, Mn, Mo, Ni, Si, Ti, V, and W. With this selection of elements a broad range of steels and cast irons is covered. The database allows not only calculations within the included assessed systems but it is also capable of interpolating into regions which are not well-known. Typical steel databases are confined to the Fe-rich corner. Contrary to that the present compilation covers the composition range of all evaluated systems as much as possible.
5
Binary Systems and Ternary Systems from C-Cr-Fe to Cr-Fe-W (2012)
~EN HC NWISBN: 9783540881414 bzw. 3540881417, Band: 100, vermutlich in Englisch, Springer, gebundenes Buch, neu.
Lieferung aus: Deutschland, Lieferbar innerhalb von 3 Wochen.
Thermodynamic Properties of Inorganic Materials Compiled by SGTE, Subvolume C: Ternary Steel Systems, Phase Diagrams and Phase Transition Data Following the publication of a first set of four volumes of SGTE compiled thermodynamic properties of inorganic substances, which dealt with pure substances (Subvolume A) and a second set of five volumes with selected thermodynamic data for binary alloy systems (Subvolume B), this set of volumes focuses on data for ternary systems for one vitally important specific class of materials, steels. Various diagrams for each system are presented, calculated from a specially developed SGTE database for steels. Background information is also presented for each system. The fundamental equations used in evaluating the data are given in the introduction to the volumes and the models used in representing the data are also described. For this volume a steel database has been compiled, consisting of 11 elements: Fe, C, N, Cr, Mn, Mo, Ni, Si, Ti, V, and W. With this selection of elements a broad range of steels and cast irons is covered. The database allows not only calculations within the included assessed systems but it is also capable of interpolating into regions which are not well-known. Typical steel databases are confined to the Fe-rich corner. Contrary to that the present compilation covers the composition range of all evaluated systems as much as possible. 19.04.2012, gebundene Ausgabe.
Thermodynamic Properties of Inorganic Materials Compiled by SGTE, Subvolume C: Ternary Steel Systems, Phase Diagrams and Phase Transition Data Following the publication of a first set of four volumes of SGTE compiled thermodynamic properties of inorganic substances, which dealt with pure substances (Subvolume A) and a second set of five volumes with selected thermodynamic data for binary alloy systems (Subvolume B), this set of volumes focuses on data for ternary systems for one vitally important specific class of materials, steels. Various diagrams for each system are presented, calculated from a specially developed SGTE database for steels. Background information is also presented for each system. The fundamental equations used in evaluating the data are given in the introduction to the volumes and the models used in representing the data are also described. For this volume a steel database has been compiled, consisting of 11 elements: Fe, C, N, Cr, Mn, Mo, Ni, Si, Ti, V, and W. With this selection of elements a broad range of steels and cast irons is covered. The database allows not only calculations within the included assessed systems but it is also capable of interpolating into regions which are not well-known. Typical steel databases are confined to the Fe-rich corner. Contrary to that the present compilation covers the composition range of all evaluated systems as much as possible. 19.04.2012, gebundene Ausgabe.
6
Symbolbild
BINARY SYSTEMS AND TERNARY SYSTEMS FROM C-CR-FE TO CR-FE-W. THERMODYNAMIC PROPERTIES OF INORGANIC MATERIALS COMPILED BY SGTE, SUBVOLUME C: TERNARY STEEL SYSTEMS, PHASE DIAGRAMS AND PHASE TRANSITION DATA -
9783540881414 (2012)
DE HC USISBN: 9783540881414 bzw. 3540881417, in Deutsch, Springer, gebundenes Buch, gebraucht.
Von Händler/Antiquariat, Herb Tandree Philosophy Books [17426], Stroud, United Kingdom.
9783540881414 Hardback, This listing is a new book, a title currently in-print which we order directly and immediately from the publisher.
9783540881414 Hardback, This listing is a new book, a title currently in-print which we order directly and immediately from the publisher.
7
Symbolbild
BINARY SYSTEMS AND TERNARY SYSTEMS FROM C-CR-FE TO CR-FE-W. THERMODYNAMIC PROPERTIES OF INORGANIC MATERIALS COMPILED BY SGTE, SUBVOLUME C: TERNARY STEEL SYSTEMS, PHASE DIAGRAMS AND PHASE TRANSITION DATA -
9783540881414 (2012)
DE HC USISBN: 9783540881414 bzw. 3540881417, in Deutsch, Springer, gebundenes Buch, gebraucht.
Von Händler/Antiquariat, Herb Tandree Philosophy Books [17426], Stroud, UK, United Kingdom.
Hardback, This listing is a new book, a title currently in-print which we order directly and immediately from the publisher.
Hardback, This listing is a new book, a title currently in-print which we order directly and immediately from the publisher.
8
Symbolbild
Binary Systems and Ternary Systems from C-cr-fe to Cr-fe-w: Thermodynamic Properties of Inorganic Materials Compiled by Sgte, Subvolume C: Ternary Steel Systems, Phase Diagrams and Phase Transition Data: Vol 1 (2011)
DE HC NWISBN: 9783540881414 bzw. 3540881417, Band: 1, in Deutsch, Springer-Verlag, gebundenes Buch, neu.
Von Händler/Antiquariat, Revaluation Books [2134736], Exeter, DEV, United Kingdom.
300 pages. In Stock.
300 pages. In Stock.
Lade…