Alle lieferbaren Bücher - alle Angebote vergleichen
ISBN: 9789075146080
Bester Preis: € 81,75 (vom 28.03.2023)Aus dem Archiv:
1
Joints (2023)
EN HC NWISBN: 9789075146080 bzw. 9075146086, in Englisch, gebundenes Buch, neu.
Lieferung aus: Niederlande, Op werkdagen voor 23.00 uur besteld, volgende dag in huis.
'Joints' is effective as a textbook for students and as a reference guide to Eurocode 3 for practising structural engineers. It deals in five chapters with the design of bolted and welded joints in frames and in tubular structures according to EN 1993 (Eurocode 3). • Chapter 1 discusses the characteristics of joints in frames, focusing on beam-to-column joints. Addressed are: joint classification, modelling of joint characteristics (component method), joint resistance and the requirements for rotaional capacity and stiffness. • Chapters 2 deals with pinned joints in frames with a fin plate, with a partial depth end-plate or with angles. Design topics include joint eccentricity, reduced cross section due to bolt holes, bearing resistance for an inclined force, a joint as restraint and combined bending and shear. A worked example for each type of pinned joints is included. • Chapter 3 first summarises and identifies which types of joints may be considered as moment-resistant joints in a frame analysis. Next, both the prelimary and detailed design of these joints are discussed. Finally, two worked examples are presented of a moment-resistant beam-to-column joint with bolted end-plates and fully welded. • Chapters 4 describes the most common types of column bases and discusses the calculation of the resistance of centrically and eccentrically loaded base plates. Also the determination of the joint stiffness is addressed. Finally, the fatigue of dynamically loaded base plates is briefly discussed, as well as some execution aspects. • Chapter 5 is about the behaviour and resistance of hollow section joints. After dealing with the general characteristics of hollow section joints, the behaviour is discussed using analytical models. The parameters important in the design of welded tubular structures are explained using design charts and guidelines. Finally, the relationship between the design rules in Eurocode 3 and the design recommendations of ISO, IIW and CIDECT is discussed. The authors - prof.ir. J.W.B. Stark and prof.dr.ir. J. Wardenier - are experienced lecturers in the field of steel structures and have chaired or have been members of various research and/or standards committees. • Jan Stark is professor emeritus steel structures at Delft University of Technology and Eindhoven University of Technology and actively contributed to drafting the rules for connections in Eurocode 3. He is also the author of 'Connections'(Steel Design 3), to which Joints (Steel Design 5) fits well. • Jaap Wardenier is professor emeritus of steel structures at Delft University of Technology, was visiting professor at the National University of Singapore and a consultant in the field of steel structures. He actively contributed to the drafting of various international guidelines and standards especially for tubular structures, is (co-)author of several books particular on tubular structures and gave courses in various countries. School & studieboeken, Alle school & studieboeken, Engelse Boeken > School & studieboeken > Alle school & studieboeken.
'Joints' is effective as a textbook for students and as a reference guide to Eurocode 3 for practising structural engineers. It deals in five chapters with the design of bolted and welded joints in frames and in tubular structures according to EN 1993 (Eurocode 3). • Chapter 1 discusses the characteristics of joints in frames, focusing on beam-to-column joints. Addressed are: joint classification, modelling of joint characteristics (component method), joint resistance and the requirements for rotaional capacity and stiffness. • Chapters 2 deals with pinned joints in frames with a fin plate, with a partial depth end-plate or with angles. Design topics include joint eccentricity, reduced cross section due to bolt holes, bearing resistance for an inclined force, a joint as restraint and combined bending and shear. A worked example for each type of pinned joints is included. • Chapter 3 first summarises and identifies which types of joints may be considered as moment-resistant joints in a frame analysis. Next, both the prelimary and detailed design of these joints are discussed. Finally, two worked examples are presented of a moment-resistant beam-to-column joint with bolted end-plates and fully welded. • Chapters 4 describes the most common types of column bases and discusses the calculation of the resistance of centrically and eccentrically loaded base plates. Also the determination of the joint stiffness is addressed. Finally, the fatigue of dynamically loaded base plates is briefly discussed, as well as some execution aspects. • Chapter 5 is about the behaviour and resistance of hollow section joints. After dealing with the general characteristics of hollow section joints, the behaviour is discussed using analytical models. The parameters important in the design of welded tubular structures are explained using design charts and guidelines. Finally, the relationship between the design rules in Eurocode 3 and the design recommendations of ISO, IIW and CIDECT is discussed. The authors - prof.ir. J.W.B. Stark and prof.dr.ir. J. Wardenier - are experienced lecturers in the field of steel structures and have chaired or have been members of various research and/or standards committees. • Jan Stark is professor emeritus steel structures at Delft University of Technology and Eindhoven University of Technology and actively contributed to drafting the rules for connections in Eurocode 3. He is also the author of 'Connections'(Steel Design 3), to which Joints (Steel Design 5) fits well. • Jaap Wardenier is professor emeritus of steel structures at Delft University of Technology, was visiting professor at the National University of Singapore and a consultant in the field of steel structures. He actively contributed to the drafting of various international guidelines and standards especially for tubular structures, is (co-)author of several books particular on tubular structures and gave courses in various countries. School & studieboeken, Alle school & studieboeken, Engelse Boeken > School & studieboeken > Alle school & studieboeken.
Kategorie: Engelse Boeken
Daten vom 28.03.2023 06:10h
ISBN (andere Schreibweisen): 90-75146-08-6, 978-90-75146-08-0
Daten vom 28.03.2023 06:10h
ISBN (andere Schreibweisen): 90-75146-08-6, 978-90-75146-08-0
Zuerst gefunden: 28.03.2023 06:10:19
Zuletzt gefunden: 28.03.2023 06:10:19
Kleinster Preis: € 81,75 (vom 28.03.2023 06:10:19)
Höchster Preis: € 81,75 (vom 28.03.2023 06:10:19)
Fundstellen insgesamt: 1
Zuletzt gefunden: 28.03.2023 06:10:19
Kleinster Preis: € 81,75 (vom 28.03.2023 06:10:19)
Höchster Preis: € 81,75 (vom 28.03.2023 06:10:19)
Fundstellen insgesamt: 1
Momentan keine Suchergebnisse - vielleicht bald lieferbar
Ihre Suche nach ist bei mehr als 100 angebundenen Webshops momentan nicht lieferbar. Wir finden dieses Buch aber trotzdem innerhalb weniger Wochen.
Sie Suchen nach diesem Buch:J. Wardenier, J.W.B. Stark: Joints
ISBN: 9789075146080
Speichern Sie diese Suche kostenlos in ab, dann werden Sie automatisch benachrichtigt, sobald dieses Buch verfügbar ist. Meistens finden wir dieses Buch innerhalb weniger Wochen und verständigen Sie dann per E-Mail. Sie können dann frei entscheiden, ob Sie das Buch kaufen wollen oder nicht.
Unsere Suchtipps für Ihre Suche:
- Alle Bücher des Autors.: Suche nach "Autor: wardenier stark" liefert mehr Ergebnisse
- Suchen nach Suchbegriffen wie Autor oder Titel des Buches sind erfolgreicher als solche nach der ISBN.: Suche nach "joints wardenier stark" liefert mehr Ergebnisse
Sie haben jetzt folgende Möglichkeiten:
- Speichern Sie diese Seite in Ihren Lesezeichen oder Favoriten ab, dann können Sie jederzeit die Suche erneut ausführen.
- Das Buch ist tatsächlich derzeit vergriffen bzw. nicht lieferbar. Es ist z.B. eine Rarität. Möglicherweise ist es aber in einiger Zeit lieferbar. Speichern Sie dazu diese Suche kostenlos ab oder lassen Sie sich kostenlos auf dieses Gerät benachrichten und Sie werden automatisch per E-Mail oder Nachricht informiert, sobald dieses Buch wieder lieferbar wird. Wir sind zuversichtlich, dass wir jedes Buch auf diese Weise innerhalb relativ kurzer Zeit finden. Probieren Sie es einfach aus!
Mich bei neuen Ergebnissen benachrichtigenSuche jetzt kostenlos SpeichernIn 50 Millionen auch bereits vergriffenen Büchern recherchieren!
Anmeldung mit Google:
ODER
Anmeldung mit Facebook:
Lade…